15Quadra-fire • QV32B, QV36B • 2013-900 Rev. F • 9/06
Figure 5. Framing Dimensions
Step 2. Framing the Fireplace
Fireplace framing can be built before or after the fireplace
is set in place. Framing should be positioned to accommo-
date wall coverings and fireplace facing material. The dia-
gram below shows framing reference dimensions.
CAUTION: MEASURE FIREPLACE DIMENSIONS AND
VERIFY FRAMING METHODS AND WALL COVERING
DETAILS BEFORE FRAMING.
Framing should be constructed
of 2 X 4 lumber or heavier.
The framing headers may rest
on the fireplace stand-offs.
The center of the framing hole is one
(1) inch (25.4mm) above the center of
the horizontal vent pipe.
Model A B C D E
QV36B 42” 38 1/4” 16 1/4” 41” 27 7/8”
QV32B 37” 33” 16 1/4” 36 1/2” 24 3/8”
WARNING:
To ensure proper clearances
the front framing header must
be installed on its narrow edge
and to the front of the frame.
A
B
C
WALL STUD
NON-COMBUSTIBLE ZON
IS DEFINED BY 3” ABOVE THE
ELBOW FOR THE ENTIRE
WIDTH AND DEPTH (BEHIND THE
FRONT HEADER) OF THE FIREBOX.
3 1/2”
3
”
Î
VENT
FRAMING
HOLE
E
D
Comments to this Manuals