Village QV36B Specifications download pdf (Page 34)

34 Quadra-fire • QV32B, QV36B • 2013-900 Rev. F • 9/06

Step 4. Positioning, Leveling, and

Securing the Fireplace

• Place the fireplace into position.

• Level the fireplace from side to side and from front to

back.

• Shim the fireplace with non-combustible material, such

as sheet metal, as necessary.

• Secure the fireplace to the framing using nails or screws

through the nailing tabs.

The diagram below shows how to properly position, level,

and secure the fireplace.

Figure 32. Proper Positioning, Leveling, and

Securing of a Fireplace

Figure 33. Gas Control System

STANDING PILOT

Step 5. The Gas Control Systems

WARNING: THIS UNIT IS NOT FOR USE

WITH SOLID FUEL.

The gas control system used with this model is Standing

Pilot Ignition.

Standing Pilot Ignition System

This system includes millivolt control valve, standing pilot,

thermopile/thermocouple flame sensor, and piezo ignitor.

WARNING: 110-120 VAC MUST NEVER BE

CONNECTED TO A CONTROL VALVE IN A

MILLIVOLT SYSTEM.

WARNING:

To ensure proper clearances

the front framing header

must be installed on its

narrow edge and to the

front of the frame.

NAILING TABS

(BOTH SIDES)

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

No comments

Village QV36B Specifications Page 34